How to Build a Backyard Arbor Swing

DIY Projects, Furniture & Accessories, Lawn and Garden, Video by Danny Lipford

This garden arbor is made from pressure treated lumber and fastened with galvanized nails. Here’s how to build a arbor swing in your backyard:

  • Dig the holes and set the 4”x 4” posts in the ground.
  • Level the structure and secure it in place.
  • Fill the holes with concrete and allow it to set.
  • Attach 2”x 12” boards to the front and back with an inverted bevel cut at each end.
  • Make matching cuts in the 2”x 6” rafters and toenail them in place.
  • Add a trellis, made from 1” treated stock, to each end of the arbor. Treated lattice can be used as well.
  • Hang a swing from the rafters for a perfect backyard retreat.

Watch this video to find out more.

Comment on this articlePrint text-onlyEmail to a friend Submit to StumbleUpon Share on other sites -->

3 Comments on “How to Build a Backyard Arbor Swing”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

  1. Bruce Kimball Says:
    April 8th, 2010 at 09:15

    Can you provide a picture of the finished product?

  2. Sam Baker Says:
    May 22nd, 2010 at 00:46

    Do you have the plans available for the garden arbor with swing?

  3. Michelle Says:
    May 27th, 2010 at 09:44

    I would love to buy plans with a picture in downloadable format.

Leave a Comment

Comments submitted may be edited for clarity and used on Homefront, Today’s Homeowner®, or posted in articles on dannylipford.com at our discretion. In addition, you may submit questions at our contact page or by calling (800) 946-4420.