Cutting Sheet Goods
Carpentry, Video by Danny Lipford
Cutting large sheet goods, like plywood, doesn’t have to be difficult if you use the right approach. First support the sheet well. You can use a large table without damaging it if you elevate the sheet above it with blocks of wood (2×4s work great). Space the blocks so that both sides of your cut are supported and be sure the depth of your saw blade is set shallow enough not to cut the table below. To make the cut straight you can clamp a straight edge to the sheet to guide your saw. Set the saw at the cut line and mark on the sheet along the edge of the shoe. Transfer this measurement to the other end of the line and clamp your straight edge along these two marks. Then all you have to do is guide the saw along the straight edge to make your cut.
