How to Replace Gutter Spikes with Gutter Screws

Exterior, Repairs and Installation, Roofing, Simple Solutions, Video by Joe Truini

Gutters are often installed using aluminum gutter spikes and ferrules which can bend easily and work loose over time. Replacing them with steel gutter screws and rigid plastic ferrules provides a more secure alternative and will prevent them from pulling loose or sagging.

To replace gutter spikes with screws, simply remove the old gutter spike and insert the screw through the existing hole in the front of the gutter. Then use a cordless drill to drive the screw into a new hole in the fascia board. Snug the screw up to the gutter, being careful not to over tighten it.

Comment on this articlePrint text-onlyEmail to a friend Submit to StumbleUpon Share on other sites

One Comment on “How to Replace Gutter Spikes with Gutter Screws”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

  1. Official Comment:

    joe t. Says:
    February 19th, 2010 at 6:45 am

    Thanks, Nabri, glad you liked the gutter-repair tip. It’s smart–and a lot easier–to make this repair as soon as you see the gutter pull away from the house. Wait too long, and you might have to replace the entire gutter. By the way, if you can’t find gutter screws at the home center or hardware store, ask for long landscaping screws. They’ll work just as well. Good luck!–Joe T.

Leave a Comment