Expert Advice on Home Improvement
How To • Videos • Lawn & Garden • DIY • Articles
Watch The Kuppersmith Project Starting This Week on Today’s Homeowner!
By: Danny Lipford 
The Kuppersmith Project, which kicks off this week on Today’s Homeowner, is my most ambitious home renovation project ever and features the remaking of a classic American home.
Over the next 13 weeks, I’ll transform this 1926 Tudor style house into a modern, low-maintenance home with a practical, realistic approach to recycling, energy efficiency, and sustainability.
Along the way, I’ll not only demonstrate how to renovate an older home, but address the Top 50 challenges homeowners face around their own house.
The Kuppersmith Project will be featured in a 13-part TV series on Today’s Homeowner with Danny Lipford, which begins airing the week of January 31 through February 6, 2011.
Find out more at The Kuppersmith Project website, and get the latest news on Twitter and Facebook.
Please Leave a Comment
3 Comments on “Watch The Kuppersmith Project Starting This Week on Today’s Homeowner!”
You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.
We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Homefront radio show, Today’s Homeowner TV show, or online at dannylipford.com.
You might also like
Today's Homeowner with Danny Lipford® is brought to you by:
February 4th, 2011 at 12:11 pm
I own a home in Oakland Ca.built in 1968,with no insulation in the walls. Widows (5)floor to ceiling,single pane appr.1/4 inch thick ,4′wide X 8′tall (appr) Wood paneling inside and outside.how can I insulate the walls?
I added 4 ” insulation in roof when tar paper and gravel roof was replaced several years ago
Thank you for your reply.
Heinz R.Eckhardt
Ben Erickson Says:February 5th, 2011 at 8:49 am
Hi Heinz,
If your walls don’t have blocking in the middle of the studs, you could consider drilling 3″ diameter holes in the outside of the siding near the top of each stud area with a hole saw, have insulation blown in the holes, then run a bead of caulking around the outside of each plug and insert the siding plugs back in each hole. This works best if you’re planning to reside your house with vinyl siding or fiber cement, since the hole locations will be hidden.
February 5th, 2011 at 9:19 am
Will the Kuppersmith house be open for public tours?