This garden arbor is made from pressure treated lumber and fastened with galvanized nails. Here’s how to build a arbor swing in your backyard:

• Dig the holes and set the 4”x 4” posts in the ground.
• Level the structure and secure it in place.
• Fill the holes with concrete and allow it to set.
• Attach 2”x 12” boards to the front and back with an inverted bevel cut at each end.
• Make matching cuts in the 2”x 6” rafters and toenail them in place.
• Add a trellis, made from 1” treated stock, to each end of the arbor. Treated lattice can be used as well.
• Hang a swing from the rafters for a perfect backyard retreat.

Watch this video to find out more.

Please Leave a Comment

6 Comments on “How to Build a Backyard Arbor Swing”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

1. Bruce Kimball Says:
   April 8th, 2010 at 9:15 am

   Can you provide a picture of the finished product?

2. Sam Baker Says:
   May 22nd, 2010 at 12:46 am

   Do you have the plans available for the garden arbor with swing?

3. Michelle Says:
   May 27th, 2010 at 9:44 am

   I would love to buy plans with a picture in downloadable format.

4. Joe Says:
   October 27th, 2010 at 8:34 pm

   Where can I get the plans of your Backyard Arbor Swing project?

   Thanks

5. 

   Ben Erickson Says:
   October 28th, 2010 at 8:04 am

   Hi Joe,
   At present we do not have plans available for the backyard arbor swing, but we will post them with this post should we add them in the future. Thank you for your interest!

6. Sara Says:
   June 29th, 2011 at 8:32 am

   I’m also curious about plans for the swing project.

Comments submitted may be edited for clarity and used on Homefront, Today’s Homeowner^®, or posted in articles on dannylipford.com at our discretion. In addition, you may submit questions at our contact page or by calling (800) 946-4420.