Radiant flooring heating systems are an energy efficient way to gently warm a room by heating the floor. This system from Uponor uses hot water piped through a closed loop of flexible PEX plastic tubing.
First, the floor system—consisting of machined strips of plywood with a dovetailed groove to receive the plastic tubing—was screwed down to the subfloor. The curved returns at each end of the room allow one continuous piece of tubing to loop back and forth across the floor without any joints.
Once the track was in place, a bead of silicone caulking was applied to the bottom of the groove, and the plastic tubing hammered into it with a rubber mallet. A pump is used to circulate hot water through the tubing from a 2½ gallon hot water tank to warm the floor.
More information on this project can be found at (637) Today’s Addition (Part 1).
Please Leave a Comment
You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.
Comments submitted may be edited for clarity and used on Homefront, Today’s Homeowner®, or posted in articles on dannylipford.com at our discretion. In addition, you may submit questions at our contact page or by calling (800) 946-4420.
December 27th, 2010 at 8:27 pm
Where can you purchase the kit for squeaky carpet wood floor?
Thanks,
Vernon
Ben Erickson Says:December 28th, 2010 at 9:38 am
Hi Vernon,
In the article under our video on How to Fix Squeaks Under Carpeting is a link to the company that makes the squeaky floor repair kit. You can buy it online at their site. Good luck with your project!